Parts & Accessories

Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.

Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride! - Material: Forged aluminum / Engineering grade polymer - Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma - Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500 - Bracket: Fits 25.4 – 31.8mm handlebars (shims included) - Max Load: 480g / 16.93oz - Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase) - Weight: 52g / 1.83oz - Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

The strand of 23 LEDs keep a hammock, tent, or campsite lit at night. - Twilights are not one, but a string of 23 LED lights to show the way - Powered by 3 AAA batteries (Not included) - Over 72 hours of burn time - Includes carry case with Velcro closure - Length: 120 - Weight: 4oz

Keep your favorite lights running bright with Serfas' Bat-4 Replacement Battery. It is included with TSL-2500 and TSL-Police lights but fits several other models as well.

Replacement Part – Aero Tail Light Bracket - Works For Both Headlight & Tail Lights - Great For Helmet Application - 3 Strap Sizes Allows Fitting From 20mm To Over 100mm - Adjusts To Fit Aero & Round Seat Posts & Handlebars Compatible With: TST-70 TST-100 TST-150 TBT-50R TBT-120F

Battery Replacement Guide For E-Lume Series Headlights: - E-Lume USL-200/250, 1-Cell Li-Ion 1400 mAh (ESB-1400) - E-Lume USL-450/500, 1-Cell Li-Ion 2200 mAh (ESB-2200) - E-Lume USL-600/650/850/900, 1-Cell Li-Ion 2600 mAh (ESB-2600) - E-Lume USL-1100/1200, 2-Cell Li-Ion 2200 mAh (ESB-4400) - E-Lume USL-1500/1600, 2-Cell Li-Ion 2600 mAh (ESB-5200) - Battery Removal/Installation Instructions Included - Allen Key Tool Included

For Serfas Metro Helmet – Replacement Rear Light Serfas Metro Helmet Compatibility: - HT-404BKGY - HT-400BKGY - HT-404BLBK - HT-400BLBK - HT-404WTBK - HT-400WTBK

The ultra-compact Vibe Pro Headlight is the perfect lighting solution for effortless, smart safety. This extra bar mount lets you switch the light between bikes in seconds - perfect for families or those with a quiver of two-wheeled fun. The included non-slip strap easily fits around oversize bars but can be cut down for an ideal fit on small handlebars. Features - Innovative twist-lock system ensures Vya will lock into mount - Secure design allows Vya Pro Headlight mount to be placed above or below the handlebar due to its unique design. Vya Headlight is designed to be mounted in front of stem. - Compatible with Vya Pro Headlight and standard Vya Headlight

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

Replacement seat post mount for the Tuck e-Bike Taillight. Secure design with non-slip strap ensures light is stationary even in rough, bumpy terrain. - Includes plastic wedge spacers to ensure Tuck mounts at optimum angle for premium visibility

Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.

Replacement Part – Universal Rack Mount - Fits all Serfas tail lights (Except TST-70, TST-100, & TBT-50R) - Bolts to rack for easy removal of tail light

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

Replacement Part – Universal Tail Light Bracket - Fits all current tail lights with removable bracket except UTL-4bk - Long silicone strap allows endless mounting options - No tools needed - Not compatible with: TST-70, TST-100, TST-150 & TBT-50R

Replacement Part – TST Tail Light Saddle Rail Mount Allows mounting of tail light direct to saddle rails. Compatible With: TST-70 TST-100 TST-150 TBT-50R

Replacement Part – Top Bar Headlight Bracket - Works with flat top & round handle-bars - 3 strap sizes allow fitting from 20mm to over 100mm - Adjusts to fit aero & round seat posts & handlebars - For lights up to 120 grams in weight - Fits all Serfas headlights EXCEPT: USL-200, USL-250, USL-450, USL-500

Replacement Part – Clip Compatible With: - TL-411 - TL-80 - UTLA-8 - USLA-8 - UTL-60 - UTL-30 - UTL-15

USB cable for charging NiteRider® bike lights that utilize a micro USB charge port connection System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

Keep your favorite light running with Serfas' RB-LI+ Replacement Battery. This Lithium-ion battery compatible with Serfas' True 150+, 250+, and 500+ lights.