Get your next time trial or triathlon off to the right start with Zipp's VukaBull Base Bar. It's the first thing you reach for when you blast out of the start gate, so Zipp takes extra care with the carbon layup to ensure you have the lightest, most robust bar possible. The slightly concave nose section and forward-swept arms, along with the airfoil shape, reduce drag and stiffen the bar. Ergonomics are the key to comfort and speed, so it's available with a choice of zero or 40mm drop and the grips are angled up slightly for a more natural wrist angle when climbing and sprinting. Additionally, it has an extra wide aerobar clamping area for maximum versatility and adjustability.
The Svet V Base Bar features a low stack height and a deep drop, placing the rider in a low, aggressive steering position when out of the aerobars. - Multi-direction, multi-layer carbon fiber construction - Two-Way Fit System: Aggressive fit in standard position. Flip the base bar for a more elevated position - Straight Brake Extension: Help maintain control while remaining aerodynamic - Clean Cable Routing: Pre-slotted for internal cable routing. Di2 compatible. - 3:1 wing section with zero drop
Building up an urban fixie or townie bike? Then you just have to have the classic Bull Horn Bars from Sunlite. They're made from aluminum with a steel center sleeve, so they're light, stiff and durable.
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
Profile's T4+ Clip-on Aerobars are made of light and durable 6061 aluminum and feature ski-bend extensions with length, width and armrest adjustments so you can easily find a perfect aero position. These clip-ons have Profile's J2 brackets for a low, aero arm position and their comfy, adjustable F-19 armrests.
V4 Plus Aerobars have shallow-bend extensions designed to provide a more aggressive ride position with relaxed wrist angle. The aerobar features a low stack armrest position and forged bracket system that places the extensions below the basebar. - L1 Brackets: 6061-T6 Aluminum forged bracket system designed to place the armrest at the lowest stack possible and the extensions underneath the basebar - F-19a Aluminum Armrests: 4x fore/aft positioning, providing 45mm of adjustment while also allowing for 15-degrees (+/- 7.5-degrees) of rotation adjustment to angle armrests for a customized fit and Velcro-backed EVA foam pads that affix directly to armrest without straps - Extensions design specific for under-the-bar mounting Tech specs: - Extension: V4+ Aluminum - Stack: 35mm - Reach: -90mm, -75mm, -60mm, -45mm - Width: 150mm - 305mm - Extension Adjustment: 160mm – 275mm - Clamp: Fits 26.0mm and 31.8mm bars - Weight: 480G
T1 Plus Aluminum Aerobars with a double-ski bend shape allow riders to get in a lower rider position, minimizing drag, and allowing for more power output with a neutral hand position. - 6061-T6 Aluminum construction; shot peened with anodized finish - J2 Bracket: The extension bracket, isolated from the basebar bracket, allows for a wider range of armest adjustment possibilities. Easily adjustable in length and angular rotation for a customized fit. - F-19a Aluminum Armrest: 4 position fore/aft adjustment along with 15° of rotational adjustment to dial in the fit. Velcro-backed EVA Foam pads affix directly to armrest without additional straps. - Ability to increase stack up to 80mm with optional Aerobar Bracket Riser Kit. Tech specs: - Stack: 60mm-120mm - Reach: Max Aft -180mm, Max Fore 70mm - Extension Adjustment: 155mm-290mm (C of basebar-End) - Width: 145mm-300mm (center to center) - Center Clamp Diameter: Fits 26.0mm and 31.8mm bars - Color: Anodized Matte Black - Weight: 503g
Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps - A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon base bar - Carbon 3T Comfort Cradle with neoprene pads - Aluminum aero extensions - Weight: 810 grams in the "low position" - UCI legal
Profile's T1+ Clip-on Aerobars feature Stryke-bend extensions with length, width and arm-rest adjustment so you can easily achieve your perfect aero position. The 6061 aluminum extensions keep weight down, while the forged brackets provide strength exactly where you need it. You'll get fast and stay there thanks to J2 brackets for an adjustable lower arm position, giving you an edge over your competition whether it's other racers or your own personal record.
The Zipp Vuka Alumina, crafted from 6066 series aluminum, offers a base bar with superior aerodynamics and ergonomics at an affordable price. - Handgrips are angled upward by 5 degrees for a natural wrist position when climbing or sprinting - Sleek with clean internal cable routing for easy installation
Page 1 of 1